sundries
plastic washer bottle with built in 12 volt pump with mounting bracket. 170mm x 140mm x 70mm 
windscreen washer pump, manual push black plastic button. 
single jet, small (8mm diam), chrome plate. requires 4.65mm hole through metal panel. 
double jet, nickel plated. approx 13mm diam. requires 7.7mm hole through metal panel. 
adaptor to enable the fitting of a spline shaft wiper arm on to a shaft . secures with pinch bolt, dimensions 20mm tall with 19mm diameter base, central bore 6mm (7/32") 13.5mm spline. 
3 stud wiper motor fixing for Lucas CR and CRT wiper motors. Lucas part number 741583 
black vacuum wiper tubing, 6mm outer diameter with fine ribs. wiper arm
original CAV black finish wiper arm to suit 3/16" or 1/4" shaft, clamping top nut is hollow to accommodate longer drive shafts, flat blade type arm (8mm wide) that fits wiper blades with horizontal sl 
chrome and stainless steel finished hand operated windscreen wiper arm and blade. requires 1/4" (6mm) hole for mounting (handle detaches) , 240mm long flat blade. 
tandem wiper assembly, chrome plate finish, of pre war pattern with tightening nut forward (to front). arms adjustable 125mm to 190mm in length, linked bar adjustable 350mm to 650mm . requires slot ty 
double arm, driven at end tandem set. arms adjustable 125mm to 190mm long. link bar adjustable from 350mm to 650mm long. arms will fit 3/16" or 1/4" drive shaft, chromium finish. wiper blades (cat. No 
centre drive tandem wiper arm set, chromium finish. Wiper arms adjustable 125mm to 190mm long, link bar adjustable to approx 650mm centres. arms will suit 3/16" or 1/4" dia drive shafts. blades (370), 
stainless steel adjustable wiper arm for 1/4" wiper motor shaft. this arm has a strong sping to pull blade on to glass. offered as standard with end for slot type blade, this can be changed to bayonet 
plated finish adjustable wiper arm with tightening nut forward (to front). remanufactured to correct Trico prewar pattern. supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. slot blad 
black finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shaft, for slot type blade. offered adjustable in length from 140mm to 190mm OR 190mm to 230mm long. remanufactured to correct Tr 
stainless steel wiper arm for spline fitting (14.8mm size), adjustable in length from 170mm to 300mm long. choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (specify).please note
supplied cranked as shown. can easily be altered without damage to item.
chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shaft, for wrist fitting type blade. remanufactured to correct Trico pattern. adjusts from 225mm to 265mm long. alternatively we supplied straight, but stainless steel arm can easily be cranked as necessary.
chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shaft, for slot type blade. remanufactured to correct Trico pattern. adjustable to the following lengths- short
slave arm pivot, shaft size 3/16" diameter, bolts through 8mm hole in screen, for use with dual wiper set. chrome plated, but we also offer in nickel finish. 
chrome plated adjustable wiper arm to fit standard 14.8mm spline drive, for wrist fitting type blade. remanufactured to correct Trico pattern. adjusts from 225mm to 265mm long. supplied straight but s wiper blade
Magnatex manufacture BE30-10 stainless backed flat wiper blade, length 250mm. slide-on type for 4.8mm max wide flat arm secured with screw through top chrome plated casting. 
rubber peg to secure slot type blade to arm. 
bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. stainless steel back with sprung rubber wiper. available in the following lengths 225mm, 250mm, 275mm or 300mm . p 
flat, stainless steel backed blade for 5.2mm bayonet wiper arm. 250mm long (can be cut down in length) 
slot type wiper blade for flat screen, stainless steel back. (use peg 372 or 372A to secure). available in the following lengths 200mm (8"), 225mm (9") or 250mm (10"). can be shortened by cutting. 
wrist type fitting blade, (sometimes refered to as rainbow) for curved windscreens. stainless steel back with sprung rubber wiper. available in the following lengths 200mm, 225mm, 250mm, 275mm or 300m 
wrist type wiper blade for flat screen as Trico P1000, stainless steel backed blade for wrist arm. 250mm long (can be cut down in length). 
rubber peg to secure wiper blade - with triangle flap wiper motor
Trico vacuum wiper motor, small size 100mm wide, 57 high, 50 deep, 1/4" shaft. brand new old stock
practical modern wiper motor for continual use, 6 volt or 12 volt. inoffensive dull black plastic cover, switch with 'auto-park'. central drive offtake (6mm), requires 8.7mm shaft hole through screen, 
powerful, robust, silent wiper motor with 110 degree sweep, which will drive any wiper set. mounting hole 10mm, shaft size 5mm, black painted aluminium cover with switch built in. shaft length easily 
practical modern wiper motor for continual use 12 volt. polished stainless steel cover, will 'auto-park' to one side. central drive offtake (6mm), requires 8.7mm shaft hole through screen, with one s
practical modern wiper motor for continual use 6 volt. polished stainless steel cover, will 'auto-park' to one side. central drive offtake (6mm), requires 8.7mm shaft hole through screen, with one st 
CAV wiper motor, 6 volt and 12 volt stocked with inbuilt on/off switch on end, 24 volt at increased price usually without switch. good quality new old stock. black finish. approx 125mm overall length