adhesives
bandings
carpet binding, 25mm wide non-stretch leathercloth, one edge folded over (single felled), basic range of colours. supplied in 10 metre rolls only 
hidem banding, 13mm wide, leathercloth covered, stocked in black, fawn together with limited other colours, supplied in 10 metre coils only
hidem banding, 16mm wide, leathercloth covered, stocked in black, fawn and some other colours. per 10 metre coil only 
16mm wide hidem banding made in wigan hooding cloth. available in lengths of 1800 mm only, which is roll width of the hooding cloth and should be in choice of black or fawn 
hidem banding, headlining cloth covered, to match our cloth 244, grey only, 16mm wide. 
hidem end cap, nickel plated on brass 16mm wide only. suitable for exterior work, will not corrode. 
hood webbing 51mm wide, stocked in black, grey and fawn. 
firm twisted paper traditional easy to handle cord for making seat piping, approx 3mm diameter. 
3mm bead, 10mm flange leathercloth covered cord, stocked in blue and maroon.supplied in 10 metre coils only
bedford cord
larger quantity discount available.
carpet
medium quality carpet, rubber coated backing, close tufted synthetic pile carpet, 1 metre wide. offered in black only. clips
used to hold badges to panels, when originals are no longer availabl. will fit a mounting post approx 5.5mm, outside daimeter 14.5mm. sold in packets of 10. 
edge or hole fitting, approx. 12mm reach. per packet of 10 pieces 
spring clip - double sided S shape edge clip, per packet of 10 pieces 
push on captive speed nut panel clip for self tap screws. for 6/8 gauge screw size. per packet of 10 pieces 
'plate fixing' clips - arrow head clips fits into front of plate which is held with spikes in rear of panel, per packet of 10 pieces, for measurements see 883c and 883p. 
arrow head clip only for trim, 17mm reach approx, 12mm wide arrow, 25mm wide at base, per packet of 10 pieces 
trim panel fixing clip, rear push through clip holder only, 25mm long 12mm wide, prongs 7mm deep.per packet of 10 pieces
black plastic socket for fitting badges with mounting posts, fits into panel hole 4mm to take 3mm post, sold in packets of 10. 
push fit panel clip, domed head, mat black finish, all metal constrction.size measures: head 15mm diameter, length 20mm (under head) to suit 7mm hole.
priced each,
price will be reduced by 15% (at
clips to the rubber/sponge (SR24), fits to door/door appature.measures: 13.5mm overall, suits 6mm hole
double barbed spring clip for fitting under push on door trim. per packet of 10 pieces 
spring clip with 4mm gap U, for retaining headlining or weatherstrip, per packet 10 pieces
spring clip with 3mm gap U, for retaining headlining or weatherstrip, per packet of 10 pieces 
clip to fit to bottom bead of weatherstrip, and vertical edge on door panel, per packet of 10 pieces 
clip "Ford type" for weatherstrip, fits into side slot. dimensions approx 16mm long, 13mm high, gripper width max 2.5mm. per packet of 10 pieces 
arrow head spring clip, approx 17mm across base, 11mm widest point on arrow, 17mm deep, per packet of 10 pieces cloth fasteners
steel 2BA hex nuts for tenax, lift the dot etc studs, per packet of 10 cloth fasteners - carpet veltex fasteners
nickel plated Veltex socket complete with black metal ring which is pushed through the carpet into the plate and the points are folded over, thus the fitting is almost invisible when fitted, per packe 
nickel plated Veltex stud with self tap screw, per packet of 10 cloth fasteners - durable dot
button (15mm overall) and socket for cloth fitting, to fit over 10mm stud, nickel plated finish, per packet of 10 pieces 
stud (10mm) with screw for body fitting, nickel plate finish, per packet of 10 pieces 
stud (10mm) and eyelet for cloth mounting, nickel plate finish, per packet of 10 pieces 
punch tool and bed set for closing down Durable Dot fasteners. cloth fasteners - lift the dot
single height clinch type stud (fixed to material), nickel plated finish, per packet of 10 
single height self tap metal screw stud, nickel finsh, per packet of 10 
socket with back plate (fixed to material), nickel plate finish, packet of 10 
double height, two screw base stud, nickel plate finish 
single height, two screw base stud, nickel plate finish, per packet of 10 
single machine thread stud. per packet of 10 pieces 
double height M5 machine thread stud, nickel plated, per packet of 10 
single height wood screw stud, nickel plated finish, per packet of 10 
double wood screw stud, oversize machine cut thread to accommodate for pre-cut worn holes in woodwork. nickel plated finish. per packet of 10 pieces
punch tool for making holes in cloth for socket cloth fasteners - tenax
for tightening back nut of Tenax socket, nickel plated 
nickel plated on brass socket with nut, fixes through material. pull centre knob to release claw type catch. per packet of 10 pieces 
nickel plate on brass stud with 2BA machine thread without shoulder, per packet of 10 pieces. thread approx 9mm long. 
nickel plate on brass stud with 5mm machine thread with shoulder, per packet of 10 pieces. thread 9mm long.
nickel plate on brass stud with long 2BA machine thread without shoulder (as used on MG, Lotus, TR etc.) thread 25mm long. 
nickel plate on brass stud with wood screw thread, without shoulder, per packet of 10 pieces 
nickel plate on brass stud with wood screw thread, with shoulder, per packet of 10 pieces 
screw top and stud for mounting on to cloth. nickel plated cloth fasteners - turnbutton
punch tool for piercing 5 holes into cloth for Commonsence cloth socket 
single height stud with back plate screw fixing, nickel plate, metal twist top, per packet of 10base approx 32mm x 12mm. overall height approx 18mm. height under twist top to face of base approx 5mm
double height stud with back plate screw fixing, nickel plate, solid twist top, per packet of 10.base approx 32mm x 12mm. overall height approx 20mm. height under twist top to face of base approx 8m
single height stud clinch type (fixed to material), nickel plate, metal twist top, per packet of 10 
socket with back plate, for fabric, nickel plated, per packet of 10
single height two screw base stud, self colour brass.base approx 32mm x 12mm. overall height approx 18mm. height under twist top to face of base approx 5mm.
double height two screw base stud, self colour brass.base approx 32mm x 12mm. overall height approx 20mm. height under twist top to face of base approx 8mm.
single height clinch base stud for cloth mounting, self colour brass
socket with backplate, for cloth, self colour brass felt - sheet
Jumbo Felt, nominal 12mm thick for sound deadening and carpet underlay, one side black latex coated, 54" wide. felt - strip
black felt strip, for use in window channels, between body and chassis etc. 1.85m lengths only. headlining
headlining cloth, Union, medium quality cloth which has been our stock quality for many years, and standard headcloth type on many vehicles. 60" (1500mm) wide. choice of light fawn, dark fawn, grey o hooding and topping cloths
both faces of cloth are same colour material
pipe bead strip
neat finishing cover for the 3/8" lead filled pin beading. with hole for fixing pin (not supplied) 
NARROW brass lead filled pin bead, 5/16" (8mm) half round, nails at approx. 90mm intervals. stocked in lengths 2 metre long ONLY.due to demand, we have taken manufacture of the part in house ourselv
brass lead filled pin bead, 3/8"/ 10mm half round, nails at approx. 90mm intervals. stocked in lengths 2 metre or 3 metre long.price 2m - £57.50, 3m - £85.00
we have taken manufacture of the par
rope pulls
a single mount large hanging or pull strap for fitting in limousine etc, strap approx 295mm x 50mm at widest. single chrome mounting bracket with 12mm hole. offered light being/fawn colour only. sold 
large free hanging silk rope pull 12" (300mm) long cord. fixed at one end only, metal ring ( hole centres 43mm) chromium plated. cord approx 30mm diameter, with shaped ball covered in yarn and net. of 
free hanging silk rope pull 9" (225mm) long. fixed at one end only, metal ring ( hole centres 36mm) chromium plated. cord approx 17mm diameter, with shaped ball covered in yarn and net. choice of colo 
double mounting silk rope pull, 10" (250mm) long. fixed at both ends, metal rings (mounting hole centres 36mm) chromium plated. cord approx 17mm diameter, choice of colours as shown on bigger image screws and washers
stainless steel, pointed, self tap screw, slot head. stocked in the following sizes. price per packet of 50 pieces.13mm x 4g
13mm x 6g
16mm x 4g
16mm x 6g
16mm x 8g
19mm x 4g
19mm x 6g
chromium plated on brass wood screw, slot head. stocked in the following sizes. price per packet of 10 pieces.13mm x 4g
13mm x 6g
19mm x 4g
19mm x 6g
19mm x 8g
25mm x 6g
25mm x 8g
32mm
countersunk type cup washer, nickel plated on brass, for 4, 6 or 8 size screw. usually used under screw head on woodwork cappings etc. specify size or send sample. per packet of 100 pieces.4 screw s
raised type cup washer, nickel plate on brass, for 4, 6 or 8 size screw. specify size or send sample. usually used on upholstery.per packet of 100 pieces.
note dimensions approx:
4 screw size - 2
raised type cup washer with rolled under edge (safe edge), nickel plate on brass, for 4, 6 or 8 size screw. specify size. these are the original old pattern upholstery cup washer.per packet of 100 p
seals - boot
rubber and sponge push on boot seal, wire sprung carrier, rubber covered, round top sponge seal. depth of carrier 12mm, upstand of bead 16mm, grip range of carrier 1.5 to 2.0mm. (dimensions approx) wholesale prices apply on roll approx 50 metres. discount on application.
rubber and sponge push on boot seal, wire sprung carrier, rubber covered, large sponge bead. depth of carrier 10mm, upstand of bead 16mm, grip range of carrier 1.5 to 2.5mm. (dimensions approx) wholesale prices apply on roll approx 50 metres. discount on application.
rubber and sponge push on boot seal, wire sprung carrier, rubber covered, long tail flap flange. depth of carrier 10mm, upstand of flange 27mm, grip range of carrier 1.5 to 2.5mm. (dimensions approx) ... wholesale prices apply on roll approx 50 metres. discount on application.
rubber and sponge push on boot seal, wire sprung carrier, rubber covered, small round bead. depth of carrier 9mm, upstand of bead 10mm, grip range of carrier 1.5 to 2.5mm. (dimensions approx) wholesale prices apply on roll approx 50 metres. discount on application.
rubber and sponge push on boot seal, wire sprung carrier, rubber covered, short tail flap flange. depth of carrier 13mm, upstand of flange 17mm, grip range of carrier 1.5 to 2.5mm. (dimensions approx) wholesale prices apply on roll approx 50 metres. discount on application.
seals - door
snap-on draught excluder, plush moquette covered (furry appearance) with draught excluder rubber approx 10mm diameter attached. wholesale prices apply on roll approx 50 metres. discount on application.
snap-on draught excluder, woven (repp) cloth cover with rubber round bead (10mm dia) on side. fitted to Morris Minor 1000, A30/35, Ford 100E etc. wholesale prices apply on roll approx 50 metres. discount on application.
coach lacing, 75mm wide, woven type, for covering our rubber extrusion RM33. supplied in light fawn colour only, which can be re-dyed darker with domestic dyes, illustrated covering View part >>
snap-on draught excluder, plush moquette covered, with large 16mm diameter soft sponge bead. a superb door trim which will suit MG, TR etc, and also fibreglass body cars, as the re-inforced carrier wi wholesale prices apply on roll approx 50 metres. discount on application.
small version of self gripping plastic door trim with 10mm diameter soft bead. available in black only. internal depth of carrier 10mm, carrier grip range 2mm - 3mm, overall seal dimension 17mm from
wholesale prices apply on roll approx 25 metres. discount on application.
snap-on draught excluder, PVC embossed trim, 16mm diameter large round sponge bead, a very useful 'modern' type of trim. stocked in black only. fits on to standard metal thickness. wholesale prices apply on roll approx 50 metres. discount on application.
snap-on draught excluder with wide carrier, particularly suitable for fibreglass edges. PVC embossed trim. 16mm diameter large round sponge bead. black only. wholesale prices apply on roll approx 50 metres. discount on application.
Furflex, tack-on draught excluder, plush moquette bead approx. 9/16" (15mm) diameter, 19mm flap for fixing. specify colour choice. wholesale prices apply on roll approx 50 metres. discount on application.
seals - edge trim
snap-on PVC edge trim, embossed finish, pushes on to metal edge of 0.5mm to 1.5mm thickness. depth approx 10mm. offered in black, white or silver colours wholesale prices apply on roll approx 50 metres. discount on application.
Titanfast edge trim, durable black vinyl covering on steel carrier, only 6mm high, cut lengths of 1.46 metres black only. application to cover thin metal edge. 
snap-on edge trim, plush moquette covered, flexible metal liner. wholesale prices apply on roll approx 50 metres. discount on application.
large type edge trim in 3100mm cut length, wide PVC snap-on edge trim for thicker panels. woven embossed texture, offered in black only. approx 16mm deep overall, to fit over 6mm to 8mm panel thicknes
wider PVC snap-on edge trim for thicker panels. lightly patterned texture, offered in black only. approx 14mm deep overall, to fit over 3mm to 5mm panel thickness. discount available for full 50 metre rolls.
PVC snap-on edge trim, embossed pattern. approx 14mm deep to fit over 2.5mm maximum thickness panel. stocked in black, grey, brown, white and red. colours are priced a £2.00 per meter. wholesale prices apply on roll approx 50 metres. discount on application.
very wide PVC snap-on edge trim for thicker panels. lightly patterned texture, offered in black only. approx 16mm deep overall, to fit over 6mm to 8mm panel thickness. discount available for full 50 metre rolls
push-on edge trim, self gripping carrier, woven repp cloth covered, offered in black, grey or red colours wholesale prices apply on roll approx 50 metres. discount on application.
sheet materials
calico (lining material), 1370mm wide, natural unbleached colour. this sheet will roll into a large tube for carriage.
a mid range quality (10oz) hessian cloth, 1.85m wide. 
fibreboard, a flexible compressed card for trim panels etc. which will fit the tightest curves, 2mm thick. sheet size 1200mm x 990mm. please note that we have to roll this board fo
millboard, a flexible compressed card for trim panels etc. one side lightly embossed grain black, will fit the tightest curves, 2mm thick. sheet size 1200mm x 990mm. cellulose paint can be used to spr 
wadding, 28oz padding in bundles approx. 20 metres long by 450mm wide.