hex head brass plug with flange collar, in the following sizes 1/8" BSP, 1/4" BSP, 3/8" BSP or 1/2" BSP 
malleable copper pipe, 1/8" (approx 3mm) outside diameter, 22swg.
malleable copper pipe, 3/16" (approx 4.5mm) outside diameter, 22swg.
malleable copper pipe, 1/4" (6mm approx) outside diameter, 22swg.
malleable copper pipe, 5/16" (approx 8mm) outside diameter, 22swg.
malleable copper pipe, 3/8" (approx 10mm) outside diameter, 22swg.
malleable copper pipe, 1/2" (approx 12.6mm) outside diameter, 20 swg.
in the following sizes, 1/8" BSP, 1/4" BSP, 3/8" BSP, per packet 10 pieces. 
to suit the following sizes, 1/8" BSP, 1/4" BSP, 3/8" BSP, 1/2" BSP fittings
1/8" BSP squared type elbow, supplied with 1/8" or 3/16" solder pipe fittings 
banjo union supplied complete with bolt and washers. these are supplied with compression nut and olive, but this can be removed and the tube soldered directly into banjo body and then the external thr 
banjo union supplied complete with bolt and washers. banjo body is machined with a 5/16" hole into which 5/16" pipe is directly soldered, if using 1/4" pipe banjo body will need to be sleeved. 
brass banjo union for for 1/4'' outside tube, with 1/8" BSP thread banjo bolt. supplied with nut, olive and washers.
brass union with filter gauze. 1/4"BSP thread with filter gauze, fitted with 7/16" x 19TPI) nut and nipple for 1/4'' O/D pipe. 
brass pipe fitting nut for solderless compression fitting, female (inside) BSP thread. 
brass 1/4" compression Tee, supplied with three nuts and compression olives.
brass 3/16" compression Tee, supplied with three nuts and compression olives.
brass 3/8" compression Tee, supplied with three nuts and compression olives.
brass 5/16" compression Tee, supplied with three nuts and compression olives.
elbow with 2 nuts and nipples for solder fitting, supplied in four sizes 1/8" BSP for 1/8" or 3/16" pipe, 1/4" BSP for 1/4" or 5/16" pipe, 3/8" BSP for 3/8" pipe and 1/2" BSP for 1/2" pipe as listed 
double ended equal union with 2 nuts and nipples for solder fitting, the union body is offered in supplied in four sizes 1/8" BSP for 1/8" or 3/16" pipe, 1/4" BSP for 1/4" or 5/16" pipe, 3/8" BSP for 
For 5/16'' (8mm) tube. 
For 1/4'' (6mm) tube. 
For 5/16'' (8mm) tube 
1/4'' (6mm) bore. Transparent reinforced flexible neoprene tubing. Use tail piece and `O' rings
to secure.
5/16'' (8mm) bore. 
For 1/4'' (6mm) tube 
For 5/16'' (8mm) tube. 
For 3/8'' (10mm) tube. 
For 3/16'' (5mm) tube. 
For 1/8'' (3mm) tube. 
1/8" BSP thread nut and solder nipple for 1/8" or 3/16" pipe for the rear of oil pressure guage. nipple has flat face and supplied with fibre washer. 
standard solder type pipe nipples only for fitting to end of copper pipe etc. offered in the following sizes:for 1/8" outside pipe fitting 1/8"BSP thread nut
for 3/16" outside pipe fitting 1/8"BSP
standard brass solder type pipe nut only (with inside thread). offered in the following sizes:1/8"BSP thread nut for 1/8" or 3/16" solder nipple
1/4"BSP thread nut for 1/4" or 5/16" solder nipple
solder type nut and nipple pipe ends supplied in sets (one nut, one nipple) in various sizes: 1/8" BSP for 1/8" or 3/16" pipe, 7/16" x 19 TPI for 3/16" pipe, 1/4" BSP for 1/4" or 5/16" pipe, 3/8" BSP 
brass Tee fitting body only. although this is threaded internally, this can easily be used for making a totally soldered tee joint on copper pipe. offered for 5/16" and 3/8" pipe only. please note t
brass tee piece supplied with three nuts and nipples for solder fitting. 
compression olive for solderless fitting. offered in imperial pipe sizes, packet of 10 pieces.
hexagon body with different threads each end, 60 degree tapered ends for solder type fittings which are not supplied. priming cup
brass fuel priming cup with 1/8” BSP thread and hollowed top, for early machines. 
brass fuel priming cup with plain stem and hollowed top, for early machines. diameter of stem 12.71mm so can have 1/4"BSP thread maximum turned on by yourself. taps - drain
angled brass drain tap marked Enfo on lever. 1/4"BSP taper thread 
brass curved drain tap with 1/4" BSP thread, for radiator drain 
brass curved drain tap with 1/8" BSP thread, for radiator drain 
butterfly type drain tap 1/8“ BSP taper thread 
butterfly type drain tap 1/4" BSP taper thread 
original pattern brass straight drain tap with T bar handle. 1/8" BSP thread 
brass straight drain tap with 3/8" BSP thread for radiator drain, overall length (including lever) 62mm, 
brass straight drain tap with 1/8“ BSP thread, for radiator drain 
brass straight drain tap with 1/4" BSP thread, for radiator drain taps - in line
1/4" BSP thread tap for in line fitting. male thread 1/4"BSP parallel thread with flange collar, female thread 1/4"BSP. body approx 21mm diameter 
straight 1/8" BSP in-line tap, supplied with one nut and nipple (specify 1/8" copper or 3/16" copper pipe) 
two way tap, 1/4" BSP thread, supplied with 3 solder type nuts & nipples for 1/4" or 5/16" pipe. on when handle is in line with outlet. 
2 way tap supplied with 3 nuts & nipples for solder fittings. 1/4" BSP for 1/4" or 5/16" pipe (specify). 
pull fuel control tap with cork seal. 7/16" x 19 TPI thread into tank, THIS IS A CONTROL TAP NOT AN ON/OFF TAP, would work as two different feeds to one line. 3 x 1/4"BSP thread for nut and nipple sup 
three way tap with 3/8" BSP threads. brass body with cork sunder lever. supplied with nuts and nipples for 3/8" pipe 
3/8" BSP thread tap for in line fitting. male thread 3/8"BSP parallel thread with flange collar, female thread 3/8"BSP. body approx 21mm diameter 
main/reserve tap fits into the bottom of some autovacs 3/8” BSP pipe, 1/2" BSP thread into tank. 
straight in line tap with gauze filter. 1/8“ BSP thread at tank end, 7/16" x 19tpi outlet end, nut and nipple for 1/4" pipe supplied, nickel plated, new old stock. 
straight in line tap 1/4“ BSP threads, 2 nuts and nipples supplied. 1/4“ or 5/16" pipe size (please specify). 
straight in line tap 1/8" BSP thread, 1 nut and nipple supplied. 1/4" or 5/16" pipe size. 
hexagonal push on/off in line tap, 1/8" BSP thread into tank, 1/4" BSP thread with nut and nipple for 1/4“ or 5/16" pipe on outlet 
hexagonal push on/off in line tap threads 1/4“ BSP both ends, supplied with nut and nipple for 1/4" or 5/16" pipe 
in line tap 1/8" BSP thread to 7/16" x 19 tpi thread. supplied with nut and nipple for 3/16" or 1/4" pipe 
in line tap 1/4" BSP tank fitting to 1/4" BSP supplied with nut and nipple for either 1/4" pipe or 5/16" pipe 
straight in line tap, 3/8" BSP threads 2 nuts and nipples supplied 3/8” pipe. 
replacement cork and brass pull knob for tap. cork approx 10mm diameter. under round pull head to end of cork 23mm.
new Enots three way tap with cork plate and 1/4" BSP threads, for 1/4'' or 5/16" copper tube. the hexagonal bar that the lever is attached to can be modified if required so the lever can be fixed to t