cylindrical fuel pump kit for competition use (with red top), delivering fuel at rate of up to 35 gallons per hour at a pressure of 6.0 to 7.25 psi (pounds per square inch) which can only be fitted to 
cylindrical fuel pump kit for fast road use (with silver top), delivering fuel at rate of up to 27 gallons per hour at a pressure of 5.0 to 6.0 psi (pounds per square inch) which can only be fitted to 
solid state fuel pump kit for fast road use, delivering fuel at rate of up to 18 gallons per hour at a pressure of 5.0 to 6.0 psi (pounds per square inch) can only be fitted to negative earth systems. 
cylindrical fuel pump kit for normal road use (with silver top), delivering fuel at rate of up to 18 gallons per hour at a pressure of 4.0 to 4.5 psi (pounds per square inch) which can only be fitted 
solid state fuel pump kit for normal road use, delivering fuel at rate of up to 12 gallons per hour at a pressure of 2.5 to 3.0 psi (pounds per square inch) can only be fitted to negative earth system 
solid state fuel pump kit for competition use, delivering fuel at rate of up to 25 gallons per hour at a pressure of 6.0 to 7.0 psi (pounds per square inch) can only be fitted to negative earth system 
some older vehicles may require a fuel pressure regulator (adjusts 1 to 5 psi) when using a Facet or Walbro pump.
glass bowl in line fuel filter which has useful provision of being able to be supported by an additional bracket on to threaded portion if required to carry the weight. available for either 1/4'' or 5 
glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres), the detatchable glass bowl held by U bracket. (replacement glass bowls can be supplied if you break it). no fi 
glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition)the ends can be unscrewed and taken apart for washing out as necessary
original new old stock Kigas hand primer fuel pump. supplied as shown. supplies limited. 51mm diameter mounting flange with wording KIGASS SCREW TIGHT and two arrows, supplied with union nuts and sold 
larger Kigas fuel priming pump, new old stock so will show some signs of storage. 56mm diameter mounting flange with wording KIGASS SCREW TIGHT K20 MK 1 and two arrows, supplied with union nuts and so 
twin point rocker assembly and blade (points) for SU fuel pumps.