suitable for the medium size vehicle of approx 1500kg or competition vehicle. enamel finish, ready to fit. two blades into three blades at friction end 3.1/2" (89mm) diameter, minimum arm (blade) leng 
suitable for smaller vehicles, up to approx 1000kg weight. enamel finish, ready to fit. one blade into two blades at friction end 3.1/2" (89mm) diameter, minimum arm (blade) length 4.1/2", maximum 9". 
suitable for the large vehicle up to 2000kg weight. enamel finish, ready to fit. two blades into three blades at friction end 4.1/2" (104mm) diameter, minimum arm (blade) length 4.1/2", maximum 10". p 
suitable for the medium size vehicle of approx 1500kg weight. enamel finish, ready to fit. one blade into two blades at friction end 4.1/2" (104mm) diameter, minimum arm (blade) lengths 4.1/2", maximu 
mounting bolt for Andre Hartford shock absorber, 1/2" BSF threads both ends, 9/16" shaft for bush, hexagon 15/16" (24mm) long. 
mounting bolt for Andre Hartford shock absorber, 1/2" BSF threads both ends, 9/16" shaft for bush, hexagon 1/8" (3mm) long. 
mounting bolt for Andre Hartford shock absorber, 1/2" BSF threads both ends, 9/16" shaft for bush, hexagon 11/16" (17mm) long. 
mounting stud for Armstrong friction shock absorbers - where rubber fits over the peg. for later Morris Cowley car and van and Morris Minor etc. choice of flange thickness, please select 3.5mm, 10mm 
special tapered castle nut for Andre Hartford mounting on to chassis bolt. chamfered base, deep slots for cross pinning, thread 1/2" BSF
spares
small type 502 (82mm dia.) raised edge indicator dial. 
large type 506 (108mm dia.) raised edge indicator dial. 
type HFC, white print on black domed dial, 82mm diameter. used on external round pressure bag type.
replacement dash control regulator bladder bag, with outer brass sleeve housing. this fits inside the dashboard housing. 
replacement Andre telecontrol control regulator adjuster knob. as original pattern with brass fitting sleeve. 
red, white black printed indicator dial with raised edge, 105mm diameter. Andre Hydro Telecontrol shock absorber type H.T.33. used on square bag type. note three holes 
115mm diameter, printed black on tin plate The B & D Stabilizer, Bentley & Draper Ltd, 4 Fenchurch Avenue, London.only one dial used per unit
90mm dimeter, printed black on tin plate The B & D Stabilizer, Bentley & Draper Ltd, 4 Fenchurch Avenue, London.only one dial used per unit
with nut, 3" (70mm) long. used on type M units 
with nut, 2.1/8" (54mm) long, used on type S units 
with nut, 2" (51mm) long for S type models 
with nut, 2 7/8" (74mm) long for M type models 
with nut, collar and flat under head. 
nylon, to replace wood/steel item 1/2" (12.5mm) or 9/16" (14.3mm) clearance bore.external measureapprox 21mm dia x 15mm long.
transfer only for 506 model. red, black, white colours.
transfer only for 502 model. red, black white colours 
type 100bis indicator dial 80mm diameter, F Repusseau & Cie. Paris. black print on aluminium. 
type 101indicator dial 89mm diameter, F Repusseau & Cie. Paris. black print on aluminium. 
type 103 indicator dial 103mm diameter, F Repusseau & Cie. Paris. black print on aluminium 
later style small brass disc, double return outer edge, large hole 40mm dia. size 90mm diameter. 
later style large brass disc, double return outer edge, large hole 40mm dia. outer 115mm diameter. 
early type brass "rivet-on" disc 82mm dia with single turned up edge 
early type brass "rivet-on" disc 90mm dia with single turned up edge 
early type brass "rivet-on" disc 115mm dia with single folded up edge 
early type friction disc/wood, 80mm x 38mm x 5mm thick 
early style friction disc/wood 88mm x 38mm x 5mm thick 
early type friction disc/wood 112mm x 38mm x 5mm thick 
later type friction disc/wood, small 84mm x 42mm either approx 3.5mm (thin) or 5.00mm (thick) approx thickness. 
later style friction large disc/wood, 106mm x 42mm either approx 3.5mm (thin) or 5.0mm (thick) approx thickness 
pressure spring, 90mm dia. used on model 506. 1/2" centre hole 
early style large rounded end pressure spring, approx. 90mm dia.as fitted to type 306 shock unit 
for bolt head. 
centre washer, pressure fit or riveted to backplate 
steel rivet to secure the centre washer and brass disc to the steel backing. per packet of 3 pieces. 
silentbloc rubber/steel bush 15/16" (24mm) outside x 7/16" (11mm) inside x 1.1/8" (28mm) long. 
silentbloc rubber/steel bush 1.1/8" (28.65mm) outside x 9/16” (14.37mm) inside x 1.9/16" (40mm) long. 
silentbloc rubber/metal bush 1.1/4“ (31.83mm) outside x 9/16" (14.37mm) inside x 1.5/8" (40mm) long. 
small raised edge printed Andre Hartford Shock Absorber London dial, 63mm diameter. colour black, red and white on tinned backing plate. used on motorcycles etc. 
pressure spring, 70mm dia. used on model 502. 1/2" centre hole 
early style small rounded end pressure spring,in black enamal approx. 70mm dia, with 14mm hole, as fitted to type 298 shock unit
early style small rounded end pressure spring, approx. 75mm dia. as fitted to type 302 shock units 
lock tag/pointer. 
early style pointer arrow. 
type 101 indicator dial 89mm diameter, T.B. Andre & Co Ltd London. black print on aluminium. 
type 103 indicator dial 101mm diameter, T.B. Andre & Co Ltd London. black print on aluminium 
rectangular type expander bag for shock absorber, 98mm long x 44mm wide x 9mm thick with 19mm diameter in centre. 
round tele-control pressure bag. fits on outside of Telecontrol unit under the metal rounded cover. 91mm diameter, 9mm thick at edge, 17mm thick at centre.